Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kenwood?
Garage door work in Kenwood typically runs $150 – $600 for a repair, while a brand-new door installation usually falls between $700 and $2,200. The most common call we get is a broken spring, which runs $180 – $340 for one spring; a matched pair is usually replaced together, so expect roughly double that for the pair. Every one of those figures is an estimate, and the written quote you get after we look at the door sets the final price.
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, so a door that won’t close today doesn’t have to wait. Estimates are free, and a technician who works only on garage doors is the one who quotes the job. Call (866) 854-5034 when you’re ready.
Key Takeaways
- Typical repair range in Kenwood: $150 – $600, depending on the part and the door.
- One spring runs $180 – $340; a pair costs about twice that, which is why springs are almost always replaced as a set.
- Opener repair is $120 – $320; a new opener installed is $250 – $550.
- New door installation is $700 – $2,200, driven mostly by door size, material and whether the frame and tracks need work.
- Free estimates. The written estimate is the price, not a starting point for a surprise.
Garage Door Cost Breakdown (2026)
Here’s what each job usually costs in Kenwood as an estimated range. These are typical numbers for the market, not a menu, because the door on your house decides which row applies.
| Job | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Spring repair (matched pair) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a job toward the top of its range? Usually a combination of things. A single-car door is a lighter, cheaper job than a wide double door, since the panels, springs and hardware all scale up with weight. A door that’s been pulling hard for years can bend a track or wear a hinge along with the part that failed, and fixing one without the other just means a second visit. And brand matters more than people expect: we’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so a brand-specific diagnosis is part of the estimate rather than a guess followed by a return trip.
What keeps a job at the low end is simple accessibility and a straightforward diagnosis. A torsion spring that snapped cleanly is a quick, clean replacement. A door that comes off its track because a car nudged it is more work, because tracks, rollers and sometimes panels have to be brought back into line together. When you call, telling us what the door is doing (won’t open, opens partway, makes a bang, hangs crooked) helps us show up prepared for the right job. Learn more about the full scope of what we handle on our garage door repair Shore Acres page.
What Affects Garage Door Pricing in Kenwood
Pricing in Kenwood isn’t mysterious, but it isn’t one number either. These are the factors that move a quote up or down:
- Door size and weight. A double-wide door needs heavier springs, more panels and sturdier hardware than a single door, and each of those parts costs more. It’s the single biggest reason two neighbors with the same repair pay different prices.
- Spring type. Torsion and extension springs are priced and replaced differently, and a matched pair is almost always replaced together so the door stays balanced. We quote one spring as one spring and a pair as a pair, never a single figure that hides the difference.
- Brand and parts. Opener brands aren’t interchangeable when something fails inside the unit. Being familiar with the eight major brands we service means we identify the actual failed component instead of replacing the whole opener out of convenience.
- Condition of the tracks, rollers and panels. A door that’s been out of balance for a while wears its tracks and rollers. Getting the door running smoothly again may mean addressing those at the same time, which is honest to quote up front.
- Whether it’s a repair or a replacement. Repair keeps the door you have and fixes the part. Replacement starts fresh, and the range widens with material choice and whether the opening itself needs work.
- Access and how the door is mounted. A low-clearance opening, a door with a lot of stuff stacked around the tracks, or an unusual mounting setup can add time. It’s not a penalty; it’s just reality on some Kenwood homes.
Repair or replace?
If the door itself is sound and the failure is a spring, cable, roller or opener, repair is almost always the cheaper path and the right one. A single spring replacement at $180 – $340 is a fraction of a new door. Replacement makes more sense when panels are dented or rusted through, the door is out of balance no matter what’s replaced, or the hardware is failing in several places at once. We’ll tell you which one the door actually needs, and we won’t push a replacement when a repair will do.
Why springs cost what they cost
A torsion spring holds the entire weight of the door under tension, and that stored energy is exactly why spring work is the most safety-critical job on a garage. A trained technician uses the right winding bars and controls the tension step by step. This is not a job to attempt with hand tools and a video; a spring that lets go under load can cause serious injury. That’s why we treat spring repair as its own dedicated service and price it honestly, including the matched pair when both springs are due.
How to Save on Garage Door
You don’t need a coupon to keep the bill reasonable. These habits do more than any promotion:
- Fix the small thing before it becomes the big thing. A squeaky roller or a door that’s starting to hesitate is a cheap fix. Left alone, a worn roller chews the track and the bill grows.
- Lubricate the moving parts. A little garage-door lubricant on rollers, hinges and springs on a regular schedule keeps the door quieter and slows wear. Ask us what to use on your specific door.
- Get one written estimate that covers everything. If the tech spots a worn cable while replacing a spring, having it quoted in the same visit saves a second trip. One call covers springs, openers, panels and full doors, so you’re not coordinating two trades.
- Don’t replace the whole opener for a cheap failed part. A properly diagnosed opener repair at $120 – $320 is often all that’s needed. Diagnosis first, parts second.
- Ask about the door’s balance. A balanced door is easier on the opener and the springs. If yours feels heavy, that’s worth a look before something else fails.
Estimates are free, so there’s no cost to finding out what your door actually needs. Call (866) 854-5034 and we’ll get a technician out with a clear number.
FAQs – Garage Door Cost
How much does garage door repair cost in Kenwood?
Garage door repair in Kenwood typically costs $150 – $600, depending on the part that failed and the size of the door. A simple roller or track fix sits near the bottom; a spring replacement with cable work sits higher. Call (866) 854-5034 for an exact quote. Estimates are free.
How much does a new garage door cost in Kenwood?
New door installation in Kenwood usually runs $700 – $2,200. Door size, material and whether the frame and tracks need attention drive the range. We’ll walk the opening with you and put the number in writing before any work starts. Call (866) 854-5034 to book a free estimate.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door panels themselves are sound. A spring replacement at $180 – $340 or an opener repair at $120 – $320 is a fraction of a new door. Replacement makes sense when panels are damaged or the door can’t be brought back into balance. We’ll tell you which way the door actually leans. Call (866) 854-5034.
How much does a broken spring cost in Kenwood?
One spring runs $180 – $340 in Kenwood. Since springs are usually replaced as a matched pair, expect about twice that for the pair. Springs are the most dangerous part of the door to handle, so leave the winding to a trained technician. Call (866) 854-5034 for a free estimate.
Can you come today?
Same-day service is often possible in Kenwood. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 854-5034 and we’ll find you the earliest slot.
How much does it cost to replace a garage door opener?
A new opener installed in Kenwood typically costs $250 – $550. If the existing opener can be repaired instead, that runs $120 – $320, and we’ll tell you which one makes sense once we’ve diagnosed the unit. Call (866) 854-5034 for a free estimate.
Do you charge a service call fee?
No. The estimate is free, and the price for the job is set by the written estimate. There’s no separate trip charge added on top. Call (866) 854-5034 and we’ll spell out exactly what the work involves before it begins.
Why a Specialist Handles the Quote
Your garage door is our only trade. That matters at quote time because the price comes from someone who has opened up thousands of these doors and knows what a bad torsion spring, a stretched cable and a tired opener each look like. A general handyman may guess at the part and a big-box installer may lean toward a full replacement. We diagnose the door correctly the first time, then quote the repair or the installation that actually fits it. Our technicians have up to 10 years of experience, we’re factory-familiar with eight major brands, and we handle the full spectrum: springs, openers, panels and full doors. One call covers it all.
When it won’t open and you can’t wait, or when you’re planning a replacement and want a specialist, the estimate is free and the number is in writing. Call (866) 854-5034. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Pricing reflects the Kenwood market as of 2026. Garage Door Repair Shore Acres offers free estimates – call (866) 854-5034.
Written by the team at Garage Door Repair Shore Acres.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Dana Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Andres Mendoza"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Wade Padgett